Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height:  0.16 mm
Recommended Layer Height:  0.16 mm
Recommended Perimeters/ Walls: 2.
Recommended Infill (%): 5% (Gyroid)
Needs Support: Yes, (Manual Snug) only in “Ghost” files.
Build Plate Adhesion: No.