3D Printed Monarch, flying butterfly by elleSTVDIO
Printed On Bambu Lab X1-Carbon Using Filament eSun PLA+
Printed without Supports, Printed without Rafts, Infill 20 %
This is MONARCH, a flying butterfly.
Recommended settings: Once 3D printed gently remove the model from the build plate. The use of short rubber bands is recommended. Twist the wings around 30 times for a longer spin.
Layer Height: 0.2 Wall Generator: Arachne
Measures: (L)14 cm x (W)10 cm x (H)0,2 cm