3D Printed Print In Place Engine by Coil_B1
Printed On Bambu Lab X1-Carbon Using Filament eSun PLA+
Printed without Supports, Printed without Rafts, Infill 20 %
4 cylinder print in place hand crank engine
Frame of the engine is:
73.5 mm/2.9" long
51 mm/2.0" high
12mm/0.5" thick
Material used at 15%, 2 wall outline:
33.07 g/1.2 oz
10,999mm/433 in
There are small parts so bed adhesion is critical you might have to print on a raft
